AP1 Biosensor outer membrane
AP1
AP1 Biosensor outer membrane
Single-component membrane system
Outer-membrane materials for glucose, lactate, urea, creatinine and uric acid sensors, supplied with a main component, auxiliary component, crosslinker and diluent.
Contact usFor development and manufacturing; not for direct clinical diagnosis or treatment.
| Target analytes | Glucose / lactate / urea / creatinine / uric acid |
|---|---|
| Compatibility | Carbon-based sensors |
| Indicative response time | 5–8 s |
| Relative signal noise | High |
| Pack sizes | 1 g / 5 g / 10 g / 100 g |
| Indicative coating yield | Approx. 200–1,000 sensors / g, depending on the coating bath and process |
| Shipping | Ice-pack shipping |
| Product code | Component | Storage |
|---|---|---|
| AP101 | Main membrane component | 2–8 °C |
| AP102 | Auxiliary membrane component | 2–8 °C |
| AP103 | Membrane crosslinker | 2–8 °C |
| AP104 | Membrane diluent | Room temperature |
AP2
AP2 Biosensor outer membrane
Sequential-layer coating system
Outer-membrane materials for glucose, lactate, urea, creatinine and uric acid sensors, supplied with an A-layer main component and a B-layer main component, crosslinker and diluent.
Contact usFor development and manufacturing; not for direct clinical diagnosis or treatment.
| Target analytes | Glucose / lactate / urea / creatinine / uric acid |
|---|---|
| Compatibility | Carbon-based sensors |
| Indicative response time | 18–30 s |
| Relative signal noise | Low |
| Pack sizes | 1 g / 5 g / 10 g / 100 g |
| Indicative coating yield | Approx. 200–1,000 sensors / g, depending on the coating bath and process |
| Shipping | Ice-pack shipping |
| Product code | Component | Storage |
|---|---|---|
| AP200 | Membrane A main component | 2–8 °C |
| AP201 | Membrane B main component | 2–8 °C |
| AP202 | Membrane B crosslinker | 2–8 °C |
| AP203 | Membrane B diluent | Room temperature |
AP3
AP3 Biosensor outer membrane
Sequential-layer coating system
AP-series outer-membrane materials for glucose, lactate, urea, creatinine and uric acid sensors, supplied with an A-layer main component and a B-layer main component, crosslinker and diluent.
Contact usFor development and manufacturing; not for direct clinical diagnosis or treatment.
| Target analytes | Glucose / lactate / urea / creatinine / uric acid |
|---|---|
| Compatibility | Carbon-based sensors |
| Indicative response time | 8–15 s |
| Relative signal noise | Medium |
| Pack sizes | 1 g / 5 g / 10 g / 100 g |
| Indicative coating yield | Approx. 200–1,000 sensors / g, depending on the coating bath and process |
| Shipping | Ice-pack shipping |
| Product code | Component | Storage |
|---|---|---|
| AP300 | Membrane A main component | 2–8 °C |
| AP301 | Membrane B main component | 2–8 °C |
| AP302 | Membrane B crosslinker | 2–8 °C |
| AP303 | Membrane B diluent | Room temperature |
AU1
AU1 Biosensor outer membrane
Room-temperature membrane materials
Outer-membrane materials for glucose, lactate, urea, creatinine and uric acid sensors, supplied with a main component, auxiliary component and diluent.
Contact usFor development and manufacturing; not for direct clinical diagnosis or treatment.
| Target analytes | Glucose / lactate / urea / creatinine / uric acid |
|---|---|
| Compatibility | Carbon-based sensors |
| Indicative response time | 15 s |
| Relative signal noise | Low |
| Pack sizes | 1 g / 5 g / 10 g / 100 g / 1 kg |
| Indicative coating yield | Approx. 100–500 sensors / g, depending on the coating bath and process |
| Storage and shipping | Room temperature |
| Manual-stated shelf life | Unmixed: 1 year; sealed membrane solution: 1 month |
| Product code | Component | Storage |
|---|---|---|
| AU101 | Main membrane component | Room temperature |
| AU102 | Auxiliary membrane component | Room temperature |
| AU103 | Membrane diluent | Room temperature |
AU2
AU2 Biosensor outer membrane
Room-temperature membrane materials
Outer-membrane materials for glucose, lactate, urea, creatinine and uric acid sensors, supplied with a main component, auxiliary component and diluent.
Contact usFor development and manufacturing; not for direct clinical diagnosis or treatment.
| Target analytes | Glucose / lactate / urea / creatinine / uric acid |
|---|---|
| Compatibility | Carbon-based sensors |
| Indicative response time | 20 s |
| Relative signal noise | Relatively low |
| Pack sizes | 1 g / 5 g / 10 g / 100 g / 1 kg |
| Indicative coating yield | Approx. 100–500 sensors / g, depending on the coating bath and process |
| Storage and shipping | Room temperature |
| Manual-stated shelf life | Unmixed: 1 year; sealed membrane solution: 1 month |
| Product code | Component | Storage |
|---|---|---|
| AU201 | Main membrane component | Room temperature |
| AU202 | Auxiliary membrane component | Room temperature |
| AU203 | Membrane diluent | Room temperature |
AU3
AU3 Biosensor outer membrane
Room-temperature membrane materials
Outer-membrane materials for glucose, lactate, urea, creatinine and uric acid sensors, supplied with a main component, auxiliary component and diluent.
Contact usFor development and manufacturing; not for direct clinical diagnosis or treatment.
| Target analytes | Glucose / lactate / urea / creatinine / uric acid |
|---|---|
| Compatibility | Carbon-based sensors |
| Indicative response time | 27 s |
| Relative signal noise | Medium |
| Pack sizes | 1 g / 5 g / 10 g / 100 g / 1 kg |
| Indicative coating yield | Approx. 100–500 sensors / g, depending on the coating bath and process |
| Storage and shipping | Room temperature |
| Manual-stated shelf life | Unmixed: 1 year; sealed membrane solution: 1 month |
| Product code | Component | Storage |
|---|---|---|
| AU301 | Main membrane component | Room temperature |
| AU302 | Auxiliary membrane component | Room temperature |
| AU303 | Membrane diluent | Room temperature |
AU4
AU4 Biosensor outer membrane
Room-temperature membrane materials
Outer-membrane materials for glucose, lactate, urea, creatinine and uric acid sensors, supplied with a main component, auxiliary component and diluent.
Contact usFor development and manufacturing; not for direct clinical diagnosis or treatment.
| Target analytes | Glucose / lactate / urea / creatinine / uric acid |
|---|---|
| Compatibility | Carbon-based sensors |
| Indicative response time | 35 s |
| Relative signal noise | High |
| Pack sizes | 1 g / 5 g / 10 g / 100 g / 1 kg |
| Indicative coating yield | Approx. 100–500 sensors / g, depending on the coating bath and process |
| Storage and shipping | Room temperature |
| Manual-stated shelf life | Unmixed: 1 year; sealed membrane solution: 1 month |
| Product code | Component | Storage |
|---|---|---|
| AU401 | Main membrane component | Room temperature |
| AU402 | Auxiliary membrane component | Room temperature |
| AU403 | Membrane diluent | Room temperature |
SP1
SP1 IV catheter coating
IV catheter surface coating
Matched coating materials for iv catheter applications, supplied with a main component, catalyst, diluent and stabilizer.
Contact usFor development and manufacturing; not for direct clinical diagnosis or treatment.
| Catalog-listed substrates | IV catheter tubing such as TPU |
|---|---|
| Pack sizes | 1 g / 5 g / 10 g / 100 g / 1 kg |
| Coating quantity | Calculated by coated surface area; contact us to confirm quantities |
| Product code | Component |
|---|---|
| SP101 | Main coating component |
| SP102 | Coating catalyst |
| SP103 | Coating diluent |
| SP104 | Coating stabilizer |
SP2
SP2 Central venous catheter coating
Central venous catheter surface coating
Matched coating materials for central venous catheter applications, supplied with a main component, catalyst, diluent and stabilizer.
Contact usFor development and manufacturing; not for direct clinical diagnosis or treatment.
| Catalog-listed substrates | Styrene, silicone and fluoropolymers (PTFE / PVDF) |
|---|---|
| Pack sizes | 1 g / 5 g / 10 g / 100 g / 1 kg |
| Coating quantity | Calculated by coated surface area; contact us to confirm quantities |
| Product code | Component |
|---|---|
| SP201 | Main coating component |
| SP202 | Coating catalyst |
| SP203 | Coating diluent |
| SP204 | Coating stabilizer |
SP3
SP3 Ablation catheter coating
Ablation catheter surface coating
Matched coating materials for ablation catheter applications, supplied with a main component, catalyst, diluent and stabilizer.
Contact usFor development and manufacturing; not for direct clinical diagnosis or treatment.
| Catalog-listed substrates | Polyimide, PEEK and related materials |
|---|---|
| Pack sizes | 1 g / 5 g / 10 g / 100 g / 1 kg |
| Coating quantity | Calculated by coated surface area; contact us to confirm quantities |
| Product code | Component |
|---|---|
| SP301 | Main coating component |
| SP302 | Coating catalyst |
| SP303 | Coating diluent |
| SP304 | Coating stabilizer |
SP4
SP4 Urinary catheter coating
Urinary catheter surface coating
Matched coating materials for urinary catheter applications, supplied with a main component, catalyst, diluent and stabilizer.
Contact usFor development and manufacturing; not for direct clinical diagnosis or treatment.
| Catalog-listed substrates | Rubber, silicone and PVC |
|---|---|
| Pack sizes | 1 g / 5 g / 10 g / 100 g / 1 kg |
| Coating quantity | Calculated by coated surface area; contact us to confirm quantities |
| Product code | Component |
|---|---|
| SP401 | Main coating component |
| SP402 | Coating catalyst |
| SP403 | Coating diluent |
| SP404 | Coating stabilizer |
SP5
SP5 Hemoperfusion bead coating
Hemoperfusion bead surface coating
Matched coating materials for hemoperfusion bead applications, supplied with a main component, catalyst, diluent and stabilizer.
Contact usFor development and manufacturing; not for direct clinical diagnosis or treatment.
| Catalog-listed substrates | Activated carbon and synthetic resins (styrene- or acrylic-based polymer beads) |
|---|---|
| Pack sizes | 1 g / 5 g / 10 g / 100 g / 1 kg |
| Coating quantity | Calculated by coated surface area; contact us to confirm quantities |
| Product code | Component |
|---|---|
| SP501 | Main coating component |
| SP502 | Coating catalyst |
| SP503 | Coating diluent |
| SP504 | Coating stabilizer |